Excellent led flood lights wholesale provider
Led street light manufacturer and supplier in China: Generally, more watts mean more light but with a higher electrical consumption. A vast area will require floodlight with more lumens. For example, a sports venue may need up to multiple decades of lumens, whereas a house’s backyard may need only 1,000 lumens. Color temperature – It defines the color of light emitted from a light source. It is measured in Kelvins (K). High color temperatures up to 5000-6000K give cooler bluish-white light, whereas lower temperatures (~3,000K) represent a warm yellowish light source. Here are some of the floodlight color temperatures: Warm White (2700K-3000K), Neutral White (3500K-4000K), Cool White (4500K-5000K), Daylight (5500K-6500K). Read even more details at led flood light factory.
Flip Chip COB – Flip-chip is the next step in LED manufacturing. There is no wire bonding step, which results in better illumination, as the semiconductors require less space and can have denser formations. Since there are no wires, there is a lower blockage, leading to a further increase in illumination. Typically, high-end street LEDs will feature a flip-chip COB. Driver on Board (DOB) – It is a less common design opted by LED manufacturers as it increases the heat load in one area. LEDs require power to light up. The circuit that powers them is called the driver. Some designs with compactness or low-power applications can have DOB LED designs. The driver is beside the set of LEDs mounted on the same substrate. It is better to have a driver in a separate compartment to improve heat transfer capabilities and avoid damage to components in high heat and harsh environments.
Rust prevention of LED street light poles: The problem of rust prevention of street lamp poles is also very important. The main methods are hot-dip galvanizing, cold galvanizing, and plastic spraying. Hot-dip galvanizing is recommended. This can prevent serious corrosion of the exterior of the light pole, and can make the street light use for a longer time. The waterproofing of LED street lights directly affects the service life of street lights. In order to avoid additional maintenance work and high maintenance costs in the later period, we must pay special attention to the waterproof problem of the lamps. The first thing to do is to find a manufacturer with a good reputation and good after-sales service to eliminate unnecessary problems and troubles in the product.
As a century-old famous school, Central China Normal University has always attached great importance to physical education. Through continuous innovation of sports activities, efforts have been made to improve the construction of sports infrastructure, create a good campus sports culture atmosphere, and achieve healthy and happy growth of students. Recently,CHZ-LIGHTING successfully completed the lighting renovation project of some venues in the Sports Center of Central China Normal University, and customized a complete set of systematic lighting solutions for it to help create a healthy and energy-saving sports lighting environment.
The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.
CHZ Lighting is the leading LED street light manufacturer in China, offering professional LED lighting fixture solutions for muliti applications and environments. Our main products include road lighting, garden lighting, solar lighting, LED flood light, stadium lighting, industrial plant lighting, warehouse lighting, etc. CHZ is a professional LED street light manufacturer, LED flood light factory and lighting solution provider for over 12 years. We adhere to the high standards of “Technological Innovation, Consistent Quality”, continuously developing new products.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. Read extra information at https://www.chz-lighting.com/.
The following are some of the specifications used to differentiate street lights from other sources of light. Operating Temperature: This refers to the optimal temperature at which these lights operate. This specification is key to all outdoor lamps. The lamps are usually helpful at night. Therefore, on average, these lamps operate at a low temperature of up to 2 degrees Celsius. The manufacturers have significantly factored in the fact that the lights can be installed in areas that experience winter seasons each year. The modular LED street light uses a die-cast aluminum shell, which has strong heat dissipation capacity and greatly improves the heat dissipation efficiency. In addition, the LED lamp beads inside the luminaire are separated and dispersed, which reduces the heat accumulation inside the luminaire and is more conducive to heat dissipation. LED street lights have good heat dissipation and natural long service life.
The origins of LED technology go back to 1962 when TI announced the first commercial hemispherical LED. Compared to other technologies, LED provides directional light emission, which leads to better brightness and focus lighting. It utilizes semiconductor technology to produce light. When current passes through a diode, minority and majority charge carriers recombine, releasing energy in the form of photons or light. There is no use of ballasts, which can easily damage them under impact. LEDs provide 70% energy savings compared to traditional roadway lighting technologies. They require low power for operation, have a robust and reliable design, and provide exceptional regulatory control for innovative city projects. These features and wide-scale applications make LEDs the top choice for use as lamps in roadway lighting.
